Estudo da adequação de uma máquina de manufatura para rede de comunicação Ethernet
Carregando...
Data
2019-07-15
Autores
Título da Revista
ISSN da Revista
Título de Volume
Editor
Universidade Federal de Goiás
Resumo
This project consists on the study of suitability of a machine tool to the Ethernet communication
network, ROMI D600 Machining Center with Siemens Sinumerik 828D embedded controller,
available at the Materials and Manufacturing Laboratory (LAMAF) of the School of Electrical,
Mechanical and Computing Engineering of the Federal University of Goiás. The objective is to
implement a communication system of the manufacturing machine in the Ethernet network, and in
order to do this it contextualizes the project in concepts of Industry 4.0 through configuration of
the machine for communication in the network and implementation of a supervision system,
remote control and data exchange. The implemented architecture was defined based on the
resources made available by the manufacturer, complementing it with some necessary software,
hardware and network protocol requirements. Features such as the Trace tool, Logical Drivers,
shared folders on the network, Ethernet TCP/IP protocol and UltraVNC Viewer remote access
software make up the communication architecture of ROMI D600 Machining Center in the lab.
Results of the architecture installed in the corporate network available in LAMAF are: connectivity
of the machine in the network for communication with other devices; possibility of data exchange;
monitoring of variables and processes; as well as access and remote control of Sinumerik 828D in
real time. Architecture configured meets the objective described in this work, because it’s possible
to observe characteristics of Industry 4.0, such as: interconnectivity between devices, data
exchange in the network, supervision and remote control. For future works, it is expected that
implemented processes be improved, UA and also obtain a greater reach for the communication in
the network.
Descrição
Palavras-chave
Indústria 4.0, ROMI D600, Sinumerik 828D, Ethernet, Industry 4.0
Citação
SOUZA, Lays Barbosa de. Estudo da adequação de uma máquina de manufatura para rede de
comunicação Ethernet. 2019. 59 f. Trabalho de Conclusão de Curso (Graduação) - Escola de Engenharia Elétrica, Mecânica e de Computação, Universidade Federal de Goiás, Goiânia, 2019.