Caracterização tribológica das lâminas de corte de trituradores utilizados no processo de tratamento de resíduos sólido
Nenhuma Miniatura disponível
Data
2023-12-18
Autores
Título da Revista
ISSN da Revista
Título de Volume
Editor
Universidade Federal de Goiás
Resumo
In Brazil, changes in production processes are observed due to environmental and social factors,
which have as their biggest consequence the increase in the generation of solid waste. Because of
these changes, it is essential to improve the efficiency of solid waste treatment processes, Thus, this
work seeks to compare in laboratory tests the wear resistance of the cutting blades used in a solid
waste crusher in the city of Aparecida de Goiânia, after application of different materials that can be
used in the manufacture of the component, since the main problem presented was the loss in
productivity in the treatment of waste due to wear of components of the crusher. After collecting a
sample of cutting blade was identified through the study of Scanning Electron Microscopy (SEM)
with Secondary Electrons (SE) and Backscattered Electrons (ERE), and also with Energy Dispersive
Spectroscopy (EDS) that the type of wear preponderant in the tribological pair is the abrasive. From
this premise, the laboratory experiment chosen was the rubber wheel wear test, because it is the
method that best fits the system wear mechanisms, the same validated according to ASTM G-65. For
the rubber wheel wear test were performed using samples of SAE 1060 steel and SAE 410 stainless
steel heat treated. The studies demonstrated that it is not feasible to change the material used in the
manufacture of the component, since the wear rates of the SAE 410D stainless steel samples were
55% higher than that of the samples that reproduce the condition of the cutting blade. This analysis
is not limited only to one field, and can be extended to other sectors, using tribology as a reference,
seeking to contribute to the academic production of production engineering, improving solid waste
treatment operations.
Descrição
Palavras-chave
Citação
SOUZA, W. M. Caracterização tribológica das lâminas de corte de trituradores utilizados no processo de tratamento de resíduos sólido. 2023. 95 f. Dissertação (Mestrado em Engenharia de Produção) - Faculdade de Ciência e Tecnologia, Universidade Federal de Goiás, Aparecida de Goiânia, 2023.