Platinum-cadmium electrocatalyst for ethylene glycol electrochemical reaction in perchloric acid electrolyte

Abstract

The electrooxidation of ethylene glycol was studied using platinum–cadmium electrocatalysts supported on high surface area carbon Vulcan XC-72. This is the first instance of Cd being used as an electrocatalyst for glycol oxidation reaction. The catalysts were prepared with various Pt:Cd atomic ratios of 90:10, 80:20, and 70:30. All the catalysts prepared were synthesized by the alcohol reduction method with 20 wt.% metal on carbon. These materials were characterized morphologically by X-ray diffraction (XRD) and Transmission Electron Microscopy (TEM) and electrochemically by cyclic voltammetry and chronoamperometry. The electrochemical measurements were carried out at 25, 35, 45, and 55 °C, and the products of the electrochemical reaction were monitored by high-performance liquid chromatography (HPLC). The XRD patterns of all the PtCd catalysts presented cubic face-centered structures, and TEM revealed a homogeneous particle distribution on the carbon support with low agglomeration. The average particle size was assumed to be the maximum of the Gaussian distribution curve of particle size, at close to 2.5 nm. The presence of Cd results in an improvement in the glycol oxidation reaction, as observed by cyclic voltammetry; linear sweep voltammetry shows a lower onset potential compared to that of pure platinum. At a constant potential of 0.50 V (vs. RHE) at ambient temperature, HPLC showed glycolaldehyde to be the main byproduct formed from ethylene glycol oxidation at potential constant of 0.50 V.