Fully 3D printing of carbon black-thermoplastic hybrid materials and fast activation for development of highly stable electrochemical sensors

Página do item simplificado
dc.creatorSilva Neto, Habdias de Araujo
dc.creatorSanthiago, Murilo
dc.creatorDuarte, Lucas da Costa
dc.creatorColtro, Wendell Karlos Tomazelli
dc.date.accessioned2024-09-11T18:31:01Z
dc.date.available2024-09-11T18:31:01Z
dc.date.issued2021-12
dc.description.abstract3D printing technologies have emerged as powerful tools for the development of electrochemical sensors. However, pre-treatment methods are often required to improve electrochemical properties of 3D printed sensing surface to enable higher electroanalytical performance. Herein, we report a toxic-free method for rapid activation of 3D printed electrochemical sensors. The proposed pre-treatment involves a combination of photochemical and electrochemical oxidation processes to degrade the excess of binder material impregnated on the cell surface. This strategy is simple, fast and exposes the carbon black nanoparticles to facilitate the faradaic reactions. The reported method ensured long-term stability (~2 months) and high heterogeneous rate constants (1.2 ± 0.3 × 10−3 cm s−1). In addition, peak currents were remarkably increased up to 353 ± 13%, clearly highlighting the potential use these 3D electrodes for electroanalytical applications. The treated electrode offered low detection limits (at µmol L−1 levels) for different analytes including metals like Cd(II) (0.009) and Pb(II) (0.006), midazolam maleate (0.54) and uric acid (0.71). Based on the achieved results, the activated, stable, and fully 3D printed electrochemical cell is very promising towards a plethora of high-performance electroanalytical applications.
dc.identifier.citationSILVA-NETO, Habdias A. et al. Fully 3D printing of carbon black-thermoplastic hybrid materials and fast activation for development of highly stable electrochemical sensors. Sensors & Actuators, B: Chemical, [s. l.], v. 349, e130721, 2021. DOI: 10.1016/j.snb.2021.130721. Disponível em: https://www.sciencedirect.com/science/article/abs/pii/S0925400521012892?via%3Dihub. Acesso em: 8 ago. 2024.
dc.identifier.doi10.1016/j.snb.2021.130721
dc.identifier.issn0925-4005
dc.identifier.issne- 1873-3077
dc.identifier.urihttps://www.sciencedirect.com/science/article/pii/S0925400521012892
dc.language.isoeng
dc.publisher.countrySuica
dc.publisher.departmentInstituto de Química - IQ (RMG)
dc.rightsAcesso Restrito
dc.subjectFused deposition modeling
dc.subjectMulti-material structures
dc.subjectCarbon-based electrodes
dc.subjectAdvanced oxidation processes
dc.subjectLow-cost analytical instrumentation
dc.titleFully 3D printing of carbon black-thermoplastic hybrid materials and fast activation for development of highly stable electrochemical sensors
dc.typeArtigo

Arquivos

Licença do Pacote
Agora exibindo 1 - 1 de 1
Nenhuma Miniatura disponível
Nome:
license.txt
Tamanho:
1.71 KB
Formato:
Item-specific license agreed upon to submission
Descrição:
Baixar

Coleções

IQ - Artigos publicados em periódicos